Evolis Primacy 6 Panel Color Ribbon - YMCKOK - 200 prints

This ribbon is composed by 6 panels: Yellow, Magenta, Cyan, Black, Overlay and Black. It is used for double-sided color printing with photo quality resolution for the front of the card and some black resin printing on the back.

ADVANTAGES
The YMCKOK ribbons represent an advantageous cost per card (around 35% less) when you need a color printing on the front of the card and some black text or elements on the back.

Capable of reproducing up to 16 million colors, all ribbons are formulated to produce sharp, bright images and clear text.

The protective varnish allows a better lifespan of your prints. Printed cards can, therefore, be used for up to 3 years.

Tested and validated by Evolis R&D and Quality departments, these consumables bring you printing quality and reliability.

GENERAL SPECIFICATIONS
Features:

• For dual-sided cards: color printing on the front, black printing on the back
• Ribbon in PET with thin layer of specialized coatings. Very low concentration of colorant insoluble in water.
• 6 whole panels - Yellow, Magenta, Cyan, Black, Overlay, Black:98mm length
• Overlay thickness: 1,1 microns
• Compatible with PVC or composite cards
• Printing lifespan: up to 3 years (for the front)
• For dye-sublimation technology
• Printing process: diffusion temperature above 50°C.

Recommended Products

Warrior Versatile 3-in-1 Slot Punch

$89.00

PVC Cards White - Blank CR80 - 30 Mil - 500 cards

$60.00

Evolis Zenius & Primacy - Black Monochrome Ribbon - 2000 cards

$42.00

Recommended Articles

	How to Increase Resin Heat on an Evolis Zenius 1 or Primacy 1 Increasing the K power setting and slowing down printing speed on your Evolis Zenius 1 or Primacy 1 card printer are essential steps for resolving resin image quality issues.
	How to print Doubled-Sided with an Evolis Primacy 1 Duplex When I print with my Evolis Primacy 1 Duplex, I get two cards instead of one card printed double-sided, what can I do? The Evolis Primacy 1 Duplex is a great ID card printer, but by default it is configured as a single-sided printer.
	How to open the Evolis Primacy side panels Need to open the Evolis Primacy side panels to access the inside of the printer? Need to install a new module? A card is jam under the rollers? Simple, watch this video to learn how to open the side panel.
	How to Calibrate your Evolis Primacy 1 Sensors If your Primacy 1 ID card printer is not properly recognizing your cards, you need to calibrate the printer sensors on your Primacy 1.